9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with...

Description

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with...
Product Overview
Item Package Quantity:1 Made from hardened precision ground alloy steel.
Accurate to within 0.002". Includes nine punches: 1/8", 3/16", 1/4", 5/16",
3/8", 7/16", 1/2", 5/8" & 3/4". Capacities: 20 Gauge Steel Sheet, 13 Gauge
Aluminum & Brass. Includes blow molded storage case. -INITIAL ADJUSTMENT If
you find the punches have a tight fit, are difficult to insert through the
clear plate guide and cannot be moved by firm hand pressure, turn over the
punch & die set and lightly tap each punch through the appropriate die from
the tool steel plate toward the clear top. Always insert punches with the
cutting edge first. The hammerhead should always squarely strike the punches
on top of the beveled end. NEVER strike the cutting edge end of the punch with
a hammer. Repeat this procedure several times until the fit becomes workable.
Insertion of the punches will become easier after continued use. -TO PUNCH A
HOLE 1. Position the material to be punched between the tool steel base and
the clear plate guide. 2. Before striking the punch, make sure the punch has
been pushed through the clear plate guide and the cutting edge of the punch is
touching the material. 3 Strike the beveled end of the punch squarely with the
hammer face. Use enough force to penetrate the material with one blow.
Striking the punch at an angle can damage the clear plate guide. 4. To remove
the punch from the die, tap the punch completely through the bottom of the set
with a hammer.
Features
See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch
Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes
Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building
Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass
Details
Manufacturer: Jounjip
Part Number: GN-9-PunchDie
Item Weight: 2.29 pounds
Package Dimensions: 6.3 x 4.88 x 1.81 inches
Material: Alloy Steel
Batteries Included?: No
Batteries Required?: No
Quality Products
Have peace of mind knowing that your order will arrive original factory sealed packaging. That means that you'll have the full force of the manufacturer's warranty to protect your purchase.
Fast and Free Shipping
You're already purchasing the item. Why pay additional for shipping, especially slow shipping? We get your order shipped out and delivered to your doorstep as quickly as possible.
Commitment
We are committed to making sure that you leave this transaction satisfied. That means having access to real people that get your questions and concerns answered quickly. Give us a shot and we will make sure that you will look to us again!